Spare or replacement Firelight Handcrafted Glass Wick

The 'Trick-O-The-Wick'

For the best care of your purchase it is important to read and follow the instructions included with every candle purchase or wick replacement. Although the wick was properly adjusted before your candle was shipped, you should check it before use. These replacement wicks come pre-assembled with fibre glass strands installed in a glass tube.  Our wicks typically never need to be replaced because they are composed of fiberglass strands, enclosed in a glass tube. The wick itself does not burn, but draws up oil through the reservoir so only the oil burns off the top.

Please be aware that when you change types of fuel, and sometimes even brands of lamp oil damage to your lifetime wick may result. It might then be necessary to replace your wick because the fiberglass strands can gum together and no longer absorb the oil efficiently.

The tops of the fiberglass strands should be exactly even with the top of the glass tube. If too low, gently push them up if the wick is 5 inches or less. For longer wicks, pull the fibers up very slightly with tweezers. DO NOT pull the fiberglass strands from their tube, it will be impossible to get it back inside the tube.

Please note: It is important that you left the wick to sit and soak up the oil for anything between 30 min to 2 hours depending on the size of your candle or length of the wick.